Which Material is suitable for Dispensing Machine?

Static mixer is widely used for dispensing machine. But, due to the difference of adhesives, which material is suitable for dispensing machine?

The answer is PP material. Mixing tube material is generally used is composed of PP plastic material, with internal smooth and low resistance to glue, good material hardness and other characteristics, in addition to a certain degree of anti-corrosion to reflect the role of plastic materials used in the lower cost will be more in line with the requirements of manufacturers to use the provisions of the glue solidified after the loss of the cost of manufacturers is relatively small, the mixing tube material using PP plastic is the demand for the market and the decision to use the material. Decide to use the material.

In the dispensing industry to the use of plastic products are basically made of pp plastic, such as: dispensing syringe, horn mixing tube, bayonet mixing tube, plastic dispensing needles and so on are so, these are all belong to the PP material plastic products. The battery filling machine can use bayonet dual-liquid dispensing valve for gluing, so it will be adjusted to mix the dual-liquid glue, and dual-liquid glue mixing is prone to bonding solidification, time to reach the solidification point will gradually solidify, and the use of pp material mixing tube can effectively reduce with the role of the glue solidification, as long as the timely cleaning, if the bayonet mixing tube can also be used.

Plastic material is very much, why use PP material composition? The main reason is that the material is a great benefit for the filling of glue, the use of thermal conductivity sealing silicone glue, glue viscosity thick, ab dispenser or battery filling machine can not be used properly, the use of iron material not only reduces the fluidity of the thermal conductivity sealing silicone, but also prone to lead to the glue in the bayonet mixing tube inside the solidification of the problem, coupled with the use of metal manufacturing costs high, may not be conducive to the use of manufacturers to complete the production of ab dispensers On the contrary, the production effect is not as good as the production effect of plastic mixing tube material, so the bayonet mixing tube needs to be replaced in accordance with the situation is no way to avoid things.

Thermally conductive potting silicone

First of all, thermal potting silica gel is with a certain solidification, no matter which material you use can not change the fact that if changed even if the use of battery gluing machine for the application of glue is also unnecessary, mainly has not reached the specific production requirements, after the bayonet double liquid dispensing valve mixing after the thermal potting silica gel will be in a period of time to appear solidification reaction, just a matter of time, no matter where it is used will be Gradually solidify, do not use iron or aluminum manufacturing mixing tube, in addition to the cost of a number of use factors within the use of mixing tube material can further reduce costs is the best.

Battery gluing machine to lead to gluing silicone glue coating, need to match the bayonet double liquid dispensing valve and bayonet mixing tube can be realized gluing process, according to the product gluing requirements can also choose the size of the bayonet mixing tube, according to the specifications of the type of glue to determine the amount of glue, only to grasp the specifications of the tube will be more likely to achieve a variety of types of gluing requirements, ab dispenser use is so, and now the dispensing technology is mature, so the production is also relatively Easy, including the use of mixing tube material type is the same, the use of fairly simple material for the production is also more convenient, while the manufacturers also have the corresponding benefits.