Every perfect home decoration work is not without the help of a seamstress. In recent years, the seam industry has developed very quickly, and more and more people to joined the seamstress army, however, some of these novice masters have not fully mastered the skills of a seamstress, so the effect of the seamstress is not very ideal. A small seam, in fact, a lot of doorways, to become a “master seamstress”, a lot of construction links to pay attention to.

The market is a more popular two-component seamstress, for example, its seam gluing link is quite demanding skills, gluing playing well, directly enhances the efficiency of the seam, so that the effect is doubled. Today we will talk about the two-component sealant gluing doorway and skills.

First, gluing preparation:

There will be two-component seam sealant loaded into the glue gun, according to the size of the brick seam cutting nozzle, it is recommended that the beveled angle of the cut, not only can make the back of the material more convenient but also ensures that the gel is fully played into the brick seam.

Formal caulking before the first two-component seam sealant in front of about 40 centimeters of material, playing without, to prevent uneven mixing of materials, resulting in late seam sealant not dry, affecting the effect of the seam.

Gluing practical tips:

1、Gluing posture: stand up more full

Gluing must not be parallel to the fight, otherwise, you can only play a thin layer, resulting in the seam sealant gel precipitation not going down, the later seam will not take long to warp and fall off.

The correct gluing technique is to stand up the glue gun, it is generally recommended that the angle with the tile floor is greater than 60 degrees. Standing up to glue can effectively ensure that the gel fully fills the gap, to make a full and close to the seam.

2、Gluing speed: all-speed explosion-proof tube

In the use of a glue gun should pay attention to the release strength, and press time, can not just be fast. Because every time you press the trigger of the glue gun, the internal pressure of the hose will rise, if pressed too many times, or too fast, not only easily to uneven glue, but also very easily leads to a burst pipe.

Gluing needs to keep pressing the speed of the glue gun and the hose glue speed consistent, it is recommended that a hand holding the glue gun with one hand to support the gun body, slow and even construction, to ensure the stability of the glue body, you can ensure that the glue is smooth and even, but also to avoid the occurrence of the “burst pipe”.

3、Gluing time: finish gluing and then rest

Gluing is an endurance work, in the use of two-component seam sealant gluing, avoid “playing a shot break”, especially in the summer heat days, if the gluing is not timely, the mixing tube is placed too long, the tube of seam sealant began to solidify, can not be used.

Gluing process, try to wait until the end of a hose and then take a break, after a group of materials, it is best to carry out the second step within 20 minutes of the pressure seam work, to avoid the curing of the gel and affect the subsequent operation.

As an important part of seam construction, gluing is a technical job. Novice masters want to make perfect seams, so the above gluing skills must be mastered, this ultra-practical seam gluing strategy, seize the collection!